Easylase USB Controller

Microcontrollers, protocols and more.
Gesperrt
Benutzeravatar
cyplex
Beiträge: 41
Registriert: Mi 22 Mär, 2006 4:34 pm
Wohnort: Enschede, The Netherlands
Kontaktdaten:

Easylase USB Controller

Beitrag von cyplex » Mi 22 Mär, 2006 4:39 pm

Hello,

i have a easylase usb controller but the device has no dmx connectors or tll connector in the case

Does some one have a easylase usb controller with those connectors? if so is it possible to make some pictures of it so i can build the connectors on in

thanks..

tl
Beiträge: 46
Registriert: So 30 Okt, 2005 1:24 pm
Wohnort: Karlsruhe

Beitrag von tl » Mi 22 Mär, 2006 7:42 pm

Download the .zip file with the documentation and drivers here

Inside the .zip is the schematic for the DMX part...

Hope this helps...

Benutzeravatar
cyplex
Beiträge: 41
Registriert: Mi 22 Mär, 2006 4:34 pm
Wohnort: Enschede, The Netherlands
Kontaktdaten:

Beitrag von cyplex » Mi 22 Mär, 2006 9:48 pm

thank you, now i know the layout the only problem left is that i don't understand the 2 symbols (max485cpa) are those ic's ? or is it possible to connect those dmx connectors directly to the board?

Benutzeravatar
jojo
Beiträge: 1936
Registriert: Fr 21 Dez, 2001 12:00 pm
Do you already have Laser-Equipment?: -
Wohnort: Germany
Kontaktdaten:

Beitrag von jojo » Do 23 Mär, 2006 9:41 am

cyplex hat geschrieben:thank you, now i know the layout the only problem left is that i don't understand the 2 symbols (max485cpa) are those ic's ? or is it possible to connect those dmx connectors directly to the board?
These are ICs.
But I think you should buy the addon-board or let somebody else build the addon board for you :-)
If you don't know exactly how to do, you can damage the whole thing.

Joachim

Benutzeravatar
genesis
Beiträge: 626
Registriert: Di 17 Feb, 2004 3:26 pm
Wohnort: PARIS
Kontaktdaten:

Beitrag von genesis » Do 23 Mär, 2006 10:29 am

yes i think this is the better solution if you not know the electronic :)
the max485 are RS485 bipolar drivers/receivers

Benutzeravatar
doctoritchy
Beiträge: 4610
Registriert: Mo 10 Jan, 2005 8:01 pm
Wohnort: belgique

Beitrag von doctoritchy » Do 23 Mär, 2006 11:08 am

the IC create symetrical signal for DMX standrat and preamplifer for long distançe ;)

Benutzeravatar
cyplex
Beiträge: 41
Registriert: Mi 22 Mär, 2006 4:34 pm
Wohnort: Enschede, The Netherlands
Kontaktdaten:

Beitrag von cyplex » Do 23 Mär, 2006 4:18 pm

well now do know what the symbols are now i could build it normaly i don't build electronics on this way i use always a diverent layout and symbols.

Does any one have a id what the add on board cost?

i live in the netherlands.

Gesperrt

Zurück zu „Micro- and other controllers“

Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder und 3 Gäste