LaserFreak Forum
Leistung lässt sich nicht einstellen..
Leistung lässt sich nicht einstellen..
Hi,
habe ein Argon Netzteil von Carl Zeiss/Jena
Leider lässt sich die leistung des lasers nicht einstellen! Kann vorne am Regler drehen ohne dass sich etwas verändert! Alles richtig geschalten! Kann es sein dass man am anschluss vom Ferrnregler noch etwas überbrücken muss?
Es ist nur möglich die leistung zu regeln wenn ich an dem poti links hinter den Kondensatoren drehe! Aber das ist ja nun auch nicht der sinn von einer externen leistungs regelung!
Hier die bilder: (achtung groß!)
klick mich an!
Hoffe ihr könnt mir helfen! Auch wenn ich euch so langsam auf die nerven gehe mit meinem argon..
Mfg Storm
habe ein Argon Netzteil von Carl Zeiss/Jena
Leider lässt sich die leistung des lasers nicht einstellen! Kann vorne am Regler drehen ohne dass sich etwas verändert! Alles richtig geschalten! Kann es sein dass man am anschluss vom Ferrnregler noch etwas überbrücken muss?
Es ist nur möglich die leistung zu regeln wenn ich an dem poti links hinter den Kondensatoren drehe! Aber das ist ja nun auch nicht der sinn von einer externen leistungs regelung!
Hier die bilder: (achtung groß!)
klick mich an!
Hoffe ihr könnt mir helfen! Auch wenn ich euch so langsam auf die nerven gehe mit meinem argon..
Mfg Storm
Ich bin keine Signatur! Ich mache hier nur sauber!
- gento
- Beiträge: 3973
- Registriert: Fr 17 Nov, 2000 12:00 pm
- Do you already have Laser-Equipment?: Apollo 4a + 4b , Turbotrack 2 , Minisax +++ G120DT +++ G138DT +++
Raytrack 40 ,CT 6210 , CT 6800 , K12
Pangolin , LDS Dynamics ,Phoenix Premium , LDS 2010 ,LDS 2008 , HE
Gas RGB 2W , 800 mW , ALC60
RGB >1W +++ - Wohnort: D / NRW / Hamm
- doctoritchy
- Beiträge: 4610
- Registriert: Mo 10 Jan, 2005 8:01 pm
- Wohnort: belgique
- doctoritchy
- Beiträge: 4610
- Registriert: Mo 10 Jan, 2005 8:01 pm
- Wohnort: belgique
okay this link for download manuals
http://home.tiscali.be/the-kgb-team/pdf/N7802.pdf
for you photo i neede the littel jump to front card this to littel jump ,in rear power output potentiometer
http://home.tiscali.be/the-kgb-team/pdf/N7802.pdf
for you photo i neede the littel jump to front card this to littel jump ,in rear power output potentiometer
- doctoritchy
- Beiträge: 4610
- Registriert: Mo 10 Jan, 2005 8:01 pm
- Wohnort: belgique
- doctoritchy
- Beiträge: 4610
- Registriert: Mo 10 Jan, 2005 8:01 pm
- Wohnort: belgique
not I wants to say that on your power supply you do not have a jumper on the J301 connector and J302 ,and that I do not know has what serve the jumper, but it are useful can be has to configure the potentiometer of regulation
sorry my english is not perfectly , y am belgium and speak french
i am posting the photo of my jumper configuration afterday !
sorry my english is not perfectly , y am belgium and speak french
i am posting the photo of my jumper configuration afterday !
Hi,
yeah! i've it! you have to jup j301 and 302 and short pin 34 and 35 at the front panel! now i can audjust the power!
how i know it? ;D try an error ;D and read the maual!
achja.. mit dem trimmer hinter den kondens.. stellt man die min stromstärke ein!
mfg strom
yeah! i've it! you have to jup j301 and 302 and short pin 34 and 35 at the front panel! now i can audjust the power!
how i know it? ;D try an error ;D and read the maual!
achja.. mit dem trimmer hinter den kondens.. stellt man die min stromstärke ein!
mfg strom
Ich bin keine Signatur! Ich mache hier nur sauber!
- doctoritchy
- Beiträge: 4610
- Registriert: Mo 10 Jan, 2005 8:01 pm
- Wohnort: belgique
- doctoritchy
- Beiträge: 4610
- Registriert: Mo 10 Jan, 2005 8:01 pm
- Wohnort: belgique
Wer ist online?
Mitglieder in diesem Forum: 0 Mitglieder und 3 Gäste