www.LaserFreak.net

Is the bIlda dac still being made, developed, used? I think this DAC is very interesting. I would like to add support for it to my laser show software but I realize it is intended for Linux. I'd certainly be willing to help write Windows drivers for it if that was required.

Hi
Happy new year

I'm very interesting with this project but i think it's dead
I know that some people make it work with he laserscan under windows

i'm going to buid it and we will see if it works great

Maybe during february or march

wait & see

see you soon

Hello

I have the bILDA DAC and I still use it because I don't have money for a Lumax or an EasyLase.

Mostly I use the bILDA with HE-Laserscan but sometimes with Popelscan.

The DAC works very well with Popelscan because the developer has made a perfect driver for Popelscan.

Unfortunatly the developer doesen't want to give the driver to other software-developer to built the driver in their software.

Because of this the bILDA doesen't work with HE-LS very well. The output is flickering because only every second frame is send to the output.

Also the output quality is very bad and there are faults with the interpolation.

The developer of HE-LS built his own driver jears ago on his own. Because only a few freaks are using the bILDA he stopped the development.


If there is anyone who is good at building drivers/firmwares for windows and the AN2135SC for his software or maybe for HE-LS you can try it, but it will be very hard work I think.

I was able to get the iShow DAC to work with Spaghetti. It may be possible to do the same with the bIlda but I don't have one to test with.

Hi

Electron tell me that he had bilda's pcb, so i'll re-contact him to have one and test that
For the moment i use minilumax with he laserscan, i just discover ilda and laser show, so it take time / money
What an expensive hobby
Does popelscan is free ?

Yes popelscan is a free software.

You can download it here: www.popelscan.de

Hi

I just download it but it don't work with minilumax, or i don't know how to make popelscan recognise it

I will try under a linux system

Popelscan DOES NOT work with Lumax/Minilumax.

Popelscan only works with bILDA and EasyLase I.

And you may kill your scan with this soft...Popel is made for mot1.

No that's wrong.

The new version of Popelscan (Poplescan 4.2) is made for ordinary scanners.

Only older versions would kill the scanner because th einterpolation is missing.

ok, sorry !
I have try it a few years ago for sure..

Spaghetti supports the mini lumax. It's a bit more advanced than PopelScan. It is not free but is inexpensive.

spaghetti is not expensive, yes,
but i can't test it without purchase it

haven't you got test license for your soft ?

i don't want to buy a soft just to test it
i hop you understand me

Yes, I understand.