LaserFreak Forum
Phoenix Micronet slim + switch rj45 trouble
Moderatoren: m.phoenix, c.phoenix
- philippe69
- Beiträge: 483
- Registriert: So 20 Jan, 2013 5:15 am
- Do you already have Laser-Equipment?: 2 Pl laserworld 1 modifier RGB 7,2w et 12w
2 RS laserworld modifier en 3,1 W RGB
1 PM-1800 laserworld RGB
2 laser Bocatec 7W 532nm
2 Laser 800mw 532nm
2 laser red 890mw 635nm
2 laser bleu 1,7 w 445nm
1 Laserworld Nextlevel projet 2,6w green
1 Laserworld Proline - X2 projet 26w RGB - Wohnort: LYON
- Kontaktdaten:
Phoenix Micronet slim + switch rj45 trouble
hello I have trouble with a configuration 4 Phoenix Micronet slim
switch on the network that I exceeded 25m cable
phoenix recognize in the hardware list, but the laser does not work
programme of the screen freezes I require to reboot the pc
use a small switch hub D-link I think it is not suitable for this type of installation
I Noticed the problem During a performance with 5 laser
2 laser green with 2x 50m cables
3 that function
If I disconnect the 2 laser 50m cables on the switch
is after a reboot of the PC 3 other rgb laser works with 25m cable
someone has faced this kind of problem
which switch you use ?
switch on the network that I exceeded 25m cable
phoenix recognize in the hardware list, but the laser does not work
programme of the screen freezes I require to reboot the pc
use a small switch hub D-link I think it is not suitable for this type of installation
I Noticed the problem During a performance with 5 laser
2 laser green with 2x 50m cables
3 that function
If I disconnect the 2 laser 50m cables on the switch
is after a reboot of the PC 3 other rgb laser works with 25m cable
someone has faced this kind of problem
which switch you use ?
Wer ist online?
Mitglieder in diesem Forum: 0 Mitglieder und 1 Gast