LaserFreak Forum
Dynamics / Mamba
Moderatoren: dj_richu, Moderator (French Zone)
- guido
- Beiträge: 6349
- Registriert: Do 20 Dez, 2001 12:00 pm
- Do you already have Laser-Equipment?: Easylase, Netlase, Laser von 1..15W.
Entwickler von Dynamics + Mamba X4 .
Lasershow Hard / Software . - Wohnort: 32469 Petershagen
- Kontaktdaten:
Dynamics / Mamba
Hello,
because there is no "Dynamics" Topic in the French Part of Laserfreak i like to Introduce me and my Software here
in the "Mamba" Forum.
Why here ? In July last Year i bought the Sourcecode of "Mamba X3" from Medialas to complete my Lasersoftware - Package.
It´s this Time only just ported to an actuall Compiler and Reading of big ILDA´s is >30% faster.
Dont spend much Time in it but if you like to update your "Elements" to a Full Version just send me an EMail.
Most Time i spend in my Software "Dynamics" which is growing more and more.
I just start a new "Live" Tool, based on the APC40 incl. LED Feedback.
I only support Easylase II, Easylase LC, Netlase and Netlase LC. Also the older "Phoenix Micro V1" which is
similar to the Easylase LC, just a different Firmware.
"Dynamics" comes with nearly 250 Music synced Lasershows from 1 to 5 Scanner.
The Documentation is only in German this Time ( /Dynamics/ Help Folder on Desktop).
If you like to try it out: Here is a Demoversion without Hardware - Output but very mighty Open GL Preview.
http://www.mylaserpage.de/down/Dynamics ... s_Demo.zip
If you have Question i can only reply in German or English
because there is no "Dynamics" Topic in the French Part of Laserfreak i like to Introduce me and my Software here
in the "Mamba" Forum.
Why here ? In July last Year i bought the Sourcecode of "Mamba X3" from Medialas to complete my Lasersoftware - Package.
It´s this Time only just ported to an actuall Compiler and Reading of big ILDA´s is >30% faster.
Dont spend much Time in it but if you like to update your "Elements" to a Full Version just send me an EMail.
Most Time i spend in my Software "Dynamics" which is growing more and more.
I just start a new "Live" Tool, based on the APC40 incl. LED Feedback.
I only support Easylase II, Easylase LC, Netlase and Netlase LC. Also the older "Phoenix Micro V1" which is
similar to the Easylase LC, just a different Firmware.
"Dynamics" comes with nearly 250 Music synced Lasershows from 1 to 5 Scanner.
The Documentation is only in German this Time ( /Dynamics/ Help Folder on Desktop).
If you like to try it out: Here is a Demoversion without Hardware - Output but very mighty Open GL Preview.
http://www.mylaserpage.de/down/Dynamics ... s_Demo.zip
If you have Question i can only reply in German or English
Gruss
Guido
www.mylaserpage.de Dynamics Lasershowsoftware Dynamics Phototour
- Gewerbliches Mitglied -
Guido
www.mylaserpage.de Dynamics Lasershowsoftware Dynamics Phototour
- Gewerbliches Mitglied -
-
- Beiträge: 146
- Registriert: So 18 Mär, 2012 4:33 pm
- Do you already have Laser-Equipment?: CNC 4 axes, tour, fraiseuse,
- Wohnort: France
- Kontaktdaten:
Re: Dynamics / Mamba
Hallo Guido! Ich denke, der französische Teil des Forums ist tot.
Persönlich würde ich gerne in der Lage sein, Dynamics in Frankreich zu fördern!
Aber mit so wenig Anwesenheit im Forum wird es sehr schwierig oder unmöglich sein.
Hast du eine Idee?
Persönlich würde ich gerne in der Lage sein, Dynamics in Frankreich zu fördern!
Aber mit so wenig Anwesenheit im Forum wird es sehr schwierig oder unmöglich sein.
Hast du eine Idee?
- nikoones
- Beiträge: 1866
- Registriert: Sa 27 Mär, 2010 5:20 pm
- Do you already have Laser-Equipment?: laser he/ne melles griotte? lsi UV (tea ) uv le ( maison ), different laser suivant l'humeur et les finances plus les nécessité
- Wohnort: Strasbourg - FRANCE
Re: Dynamics / Mamba
Salut les copain,
je ne suis pas très fort en allemand ( j'étais toujours dans le fond de la classe ) c'est pourquoi je pense qu'il serai bon de faire une traduction rapide et je le pense très instructif !!
mais j'ai compris une chose c'est que tu as dit ( et à raison ) que le forum Français n'est pas au plus haut niveau et il faudrait, en effet, faire quelque chose pour rentabiliser ce forum (( je parle pas rentabiliser en termes de sous, mais bien en termes d'éducation et de partage des connaissances !
merci donc de nous informer cavitylight ( ou une autre personne qui peut traduire ) ce serai un peu moins compliquer de comprendre et d'agir en fonction !!
@ ++= les gars !
je ne suis pas très fort en allemand ( j'étais toujours dans le fond de la classe ) c'est pourquoi je pense qu'il serai bon de faire une traduction rapide et je le pense très instructif !!
mais j'ai compris une chose c'est que tu as dit ( et à raison ) que le forum Français n'est pas au plus haut niveau et il faudrait, en effet, faire quelque chose pour rentabiliser ce forum (( je parle pas rentabiliser en termes de sous, mais bien en termes d'éducation et de partage des connaissances !
merci donc de nous informer cavitylight ( ou une autre personne qui peut traduire ) ce serai un peu moins compliquer de comprendre et d'agir en fonction !!
@ ++= les gars !
quand le sage montre la lune l’imbécile regarde le doigt !!!!
- VDX
- Beiträge: 3487
- Registriert: Mi 17 Mär, 2010 11:16 am
- Do you already have Laser-Equipment?: ... diverse Laser für die Materialbearbeitung
weitere Hobbies: - CNC-Fräsen, 3D-Scannen, 3D-Drucken, Laserbearbeitung, Mikrotechnik ... - Wohnort: Nähe Hanau, Main-Kinzig-Kreis
Re: Dynamics / Mamba
... there are some good translation sites, which can exchange between most mainstream languages - I'm mostly using DeepL:
... il y a de bons sites de traduction, qui peuvent échanger entre la plupart des langues courantes - j'utilise surtout DeepL :
https://www.deepl.com/translator
Here the automated translation of the previous post into German:
English
German
French
Spanish
Italian
Dutch
Polish
Viktor
... il y a de bons sites de traduction, qui peuvent échanger entre la plupart des langues courantes - j'utilise surtout DeepL :
https://www.deepl.com/translator
Here the automated translation of the previous post into German:
... and into English:Hey, Leute. Hey,
Ich bin nicht sehr gut in Deutsch (ich war immer im hinteren Teil der Klasse lol:), deshalb denke ich, es wäre gut, eine schnelle Übersetzung zu machen und ich finde es sehr lehrreich !!
aber ich verstand eine Sache ist, dass Sie gesagt haben ( und zwar zu Recht), dass das französische Forum nicht auf der höchsten Ebene ist, und wir sollten in der Tat etwas tun, um dieses Forum profitabel zu machen ((((( Ich spreche davon, es nicht in Bezug auf Geld, sondern in Bezug auf Bildung und Wissensaustausch profitabel zu machen!
also lassen Sie uns bitte wissen, dass Cavitylight (oder jemand anderes, der übersetzen kann) es ein wenig einfacher zu verstehen und zu handeln wäre!!
(++= Jungs!) Blinzeln:
The actual available languages are :Hey, guys. Hey,
I'm not very good in German ( I was always in the back of the class lol:) that's why I think it would be good to make a quick translation and I think it very instructive !!
but I understood one thing is that you said ( and rightly) that the French forum is not at the highest level and we should, indeed, do something to make this forum profitable ((( I'm talking about making it profitable not in terms of money, but in terms of education and knowledge sharing !
so please let us know cavitylight ( or someone else who can translate) it would be a little less complicated to understand and act on!!
(++= guys!)
English
German
French
Spanish
Italian
Dutch
Polish
Viktor
Aufruf zum Projekt "Müll-freie Meere" - https://reprap.org/forum/list.php?426 -- Facebook-Gruppe - https://www.facebook.com/groups/383822522290730
Call for the project "garbage-free seas" - https://reprap.org/forum/list.php?425
Call for the project "garbage-free seas" - https://reprap.org/forum/list.php?425
- nikoones
- Beiträge: 1866
- Registriert: Sa 27 Mär, 2010 5:20 pm
- Do you already have Laser-Equipment?: laser he/ne melles griotte? lsi UV (tea ) uv le ( maison ), different laser suivant l'humeur et les finances plus les nécessité
- Wohnort: Strasbourg - FRANCE
Re: Dynamics / Mamba
Ok, merci pur l'info, je vais faire çà !!
@++
@++
quand le sage montre la lune l’imbécile regarde le doigt !!!!
Wer ist online?
Mitglieder in diesem Forum: 0 Mitglieder und 2 Gäste